'Electromagnetic Aerospace Propulsion'™

Electromagnetic Aerospace Propulsion Legal Codicil

1. The Electromagnetic Aerospace Propulsion technology is legally prohibited from military application.

   
   

2. The Electromagnetic Aerospace Propulsion technology is strictly pursuant to the legally diligent civilian development or civilian manufacture or civilian operation.

2. The Electromagnetic Aerospace Propulsion Legal Codicil concludes its reference here.

Abstract

The following sets the experimental parameters to test a electrically engineered product. Its purpose is to propel an electromagnetic manifold along the direction of its air-core axis.

Simplicity of propulsion modality dictates that minimum operating and necessarily unique voltage be applied to the solid, toroidal manifold. The operating voltage is the maximum voltage in p = V * i. The current is then increased or decreased, accordingly, for contiguous position change. To maintain voltage transform the current, where only the current and active resistance, V/i change together. The current change is respectively for forward or reverse acceleration, and the gradual current step down delivers deceleration.

To perform its task the following 4 observations must be met.

1. The toroidal electromagnet must be powered by voltage which is unique among all of technology’s voltages. Use a voltage VPN of coefficient of ( n + 1 ) / n. I.e. V [ i ] = ( ( n [ i ] + 1 ) / n [ i ] ) * V. The unique potential difference prevents electrical amplification sharing with electrical circuits of identical voltage anywhere in the spacetime - i.e. with any similarly voltage rated circuit in space and time. The power sharing or power sink phenomenon is known as quantum power sink.

   
   

2. To move in any given axis susch as the vertical, up or down direction, the voltage must be amplified. The current magnitude and polarity determines the expected direction and distance respectively. An explanation is provided, below.

   
   

3. At intermediate amplifaction the field propulsion engine is expected to hover in the presence of an opposing acceleration such as Earth gravity.

   
   

4. The individual engines' thrusts must be vectored along their axes of their air cores.

   
   

5. The engine must operate only on direct current (DC). The charge spins about, orthogonal to the toroidal axis. It does not flow through the toroid like water through a halo shaped pipe. It is the charge spin dependent dimension of current field which revolves around ther large loop. 2 electrodes, either side of the cleave will be placed directly on the metal cleave ends of the torus.

   
   

The Toroidal Engine Model

1. Model Of The Inifitesimal Electron Revolution (Electron Particle)

The infinitesimal electron revolution is known as electron rotation or electron spin. At the quantum diameter of spin the rotation is known quantum spin. It is a continuous motion of spin, rather than simply a moment of spin. It is spin momentum or time evolution of spin moment. An electron’s quantum spin is spin down or negative quantum spin. The opposite is positron or hole spin - the spin of an electron with opposite axial rotation. (Matinga 2026)

2. Toroidal Electromagnet Diagram

The current above revolves along the anticlockwise direction of the larger black circular axis in the image, ‘Torus’, above. The charge spins in the perpendicular, smaller loop - out at the centre of the toroidal and into the page from the outer edge of the toroidal.

In the device example, above, the most resistive element, other than the negligibly low resistance of the single aluminium winding, is the inductance. There should be one very thick winding with an inner diameter of 1/10 of the outer diameter, until better laboratory-calibrated . The smallest outer diameter should be no less than 1 m - similarly as an early stage calibration.

The single winding should turn and close in a C-shape format by moulding a solid halo and cutting only one perfect cross-section across the torus. Fill the thin section with Polybenzimidazole (PBI) or higher performance polymer, as high temperature, electrical insulation, to thinly cover the entire object.

To mimic an electron (negative voltage, axial rotation), a steady current must circulate through the wire windings, anticlockwise, according to the image, for an outward from the page, south to north magnetic or spatial field. The time field is charge evolution which is equivalent to time evolution of constant current.

Acceleration of the current mimics a tachyon which must, by that definition, produce negative accelerating voltage rotation. A stable or constant electron, of ostensibly negative rotation is known as an constant electric current or an electron. An accelerating electron rotation or simply an electron revolution is a tachyon.

The charge evolution is determined as time evolution. Voltage is the field responsible for spatial evolution or cosmic inflation (the continuing Big Bang). Time evolution is the physics analogue of the world line in physics philosophy - the primary continuum or independent dimension.

Gaussian theory combined with Orthogonality Law states, as extended Orthagonality Law, that field lines tangential to those entering and exiting an enclosed surface (manifold) must be of equal number surrounding the entire manifold. (Matinga 2026)

The magnetic parallel magnetic fields of the entire universe must be common to the core of the magnet, according to Orthogonal Law. The outer field line count must also be the inner field count. Amplifying the voltage will amplify the current or increase its frequency (electric field density). Applying negative voltage to the presenting voltage reverses that frequency relating to the current. Current is the position variable.

The harmonic or scalar density increase of current will be propagated to the power as well. That changes the field density of the artificial virtual particle or electromagnetic revolution generated by the electromagnetic (artificial electron), to induce frequency drift to match a transition of spatial densities over the evolution of time. The expected result is spacetime field drift of the electromagnet to a relativistically denser (farther away) or, in simpler terms, a relativisitically high frequency location in spacetime. The current rotational direction determines the propulsion direction.

Spatial densities are rarified or condensed by the net gravity of celestial bodies.

( For best presentation, please defer to the desktop view of the document, rather than the mobile phone view. )

K = F * d ,

B * I * L * h ,

---> T * A * m ^ 2 ,

---> J ;

U [ gravitating mass ] = m * g * h ,

m * - a [earth] * - h

W = U + K ,

m * - a [earth] * h [descent]

+ B * I * L * h

A [o] = A [wire cross section] , Pi rad * d ,

---> rad m , m ^ 2 ,

rad ^ 2 , ~ rad

Since the cross section of the wire is a circle, the preferred units are 'rad m'.

L [o] = L [single wire turn]

= Pi rad * d

where d is the diameter of the wire loop or turn

Full wire length, L ~ N * L [o] * A [o] ,

---> rad * rad * rad m ,

---> rad m ,

simplified by the angular power rule

K = B * I * L * h ,

B * I * ( N * L [o] * A [o] ) * h

Bibliography

Matinga S, 2026, Xerqon Technologies (Blog), ‘Particle Structure - Rotation’, <https://www.centreweave.com/post/particle-structure-rotation>

Matinga S, 2026, Xerqon Technologies (Blog), ‘Orthogonality Law & Electrical Engineering’, <https://www.centreweave.com/post/electronics-orthogonality>

© Xerqon Pty Ltd 2026